Cases36 cases

6 to 10 of 36

1. IL-0150 A latent race condition in DynamoDB's DNS automation left an empty DNS record for dynamodb.us-east-1.amazonaws.com, and the DynamoDB and EC2 launch failures that followed caused EKS, ECS and Fargate container launch failures and cluster scaling delays in us-east-1

   Amazon Web Services2025

   Symptoms

   At 11:48 PM PDT on 19 October 2025, every system that reached DynamoDB in us-east-1 through the public regional endpoint started getting DNS failures and could not connect. This included customer traffic and internal AWS services that depend on DynamoDB. DynamoDB global table replicas in other regions still answered but fell behind in replication to and from us-east-1.

   DNS resolution failuresHigh error rateScale-up failureIntermittent connection failuresHigh latency

   Trigger

   One DNS Enactor, slowed by unusually high retry delays, applied a much older DNS plan to the regional DynamoDB endpoint just as another Enactor that had applied the newest plan ran its clean-up, which deleted that older plan and with it every IP address of the endpoint.

   Root cause

   Software defect

   Component

   Authoritative DNS servers and recordsApplication databaseCloud load balancer

   Contributing factor

   Automation amplificationRetry stormNo runbook

   Detection

   DNS failures to DynamoDB began immediately at 11:48 PM PDT and the engineering teams of affected AWS services were engaged at once; by 12:38 AM they had identified DynamoDB's DNS state as the source. The later NLB health check problem was detected by monitoring at 6:52 AM.

   Remediation

   • applied temporary mitigations by 1:15 AM that let some internal services reach DynamoDB and repaired key internal tooling
   • restored all DynamoDB DNS information by 2:25 AM through manual operator intervention
   • throttled incoming work and selectively restarted DWFM hosts from 4:14 AM so droplet leases could be re-established
   • reduced the load on Network Manager to bring network configuration propagation times back to normal by 10:36 AM
   • disabled automatic health check failover for NLB at 9:36 AM, and re-enabled it at 2:09 PM after EC2 recovered
   • relaxed the EC2 request throttles from 11:23 AM until all EC2 APIs and launches were normal at 1:50 PM

   Action items

   • Disable the DynamoDB DNS Planner and DNS Enactor automation worldwide
   • Fix the race condition and add protections against applying incorrect DNS plans before re-enabling the DNS automation
   • Add a velocity control to NLB that limits how much capacity a single load balancer can remove when health check failures cause availability zone failover
   • Build an additional EC2 test suite that exercises the DWFM recovery workflow at scale
   • Improve throttling in EC2 data propagation systems so incoming work is rate limited by the size of the waiting queue

   Lessons

   A single DNS record that automation can empty is enough to take a widely used regional endpoint off the network, and every service built on it fails in turn. A check made once at the start of a long operation can be stale by the time the operation writes its result. Recovery of the dependency is not recovery of the dependents: systems that lost state during the outage, such as EC2's droplet leases and network propagation backlog, can collapse under their own catch-up work, and container services that rely on new instance launches keep failing to launch and scale until that work is done.

   View case
2. IL-0082 Losing one CoreDNS pod during a planned EKS node reroll overloaded the remaining CoreDNS pods, causing DNS timeouts and errors across multiple services at RebelMouse

   RebelMouse2025

   Symptoms

   At 13:42 UTC on 19 May 2025, RebelMouse's monitoring tools reported a higher error rate and degraded performance across services. A routine reroll of the EKS nodes had started 27 minutes earlier, at 13:15 UTC.

   DNS resolution failuresHigh latencyHigh error rateService outage

   Trigger

   At 13:15 UTC RebelMouse started its regular reroll of EKS nodes to apply security patches. The planned, automatic termination of an EC2 instance terminated one of the CoreDNS pods.

   Root cause

   Capacity exhaustion

   Component

   CoreDNSNode pool

   Contributing factor

   Change during peak hours

   Detection

   Monitoring tools detected an increased error rate and degraded service performance at 13:42 UTC, and the tech team started investigating at 13:44 UTC.

   Remediation

   • rescheduled the affected CoreDNS pod onto a new EC2 instance
   • scaled up the CoreDNS deployment to more replicas so DNS load was spread evenly across all pods

   Action items

   • Add scale-in protection so CoreDNS pods are not terminated unexpectedly during peak load
   • Review the CoreDNS configuration so that vertical scaling of the pods works
   • Hold regular capacity reviews so the CoreDNS deployment is provisioned for peak load

   View case
3. IL-0027 All CoreDNS pods landed on one node, the node ran out of memory, and DNS for the whole service went down

   Backpackr2025

   Symptoms

   Services on the production Amazon EKS cluster behind the idus marketplace threw intermittent errors whose cause was hard to pin down. Calls to external services such as RDS and Redis failed now and then, and whenever DNS traffic spiked, domain lookups answered slowly or failed outright.

   DNS resolution failuresIntermittent connection failuresHigh latencyOOMKilledService outage

   Trigger

   All CoreDNS pods were scheduled onto the same node, and that node's memory usage spiked until it ran out of memory.

   Root cause

   Capacity exhaustion

   Component

   CoreDNSClient-side DNS resolver and cachekubeletContainer memory limitNode pool

   Contributing factor

   Unreviewed defaultsSingle point of failureNo caching

   Detection

   The write-up does not say how the full outage was noticed. The earlier DNS trouble showed up as intermittent service errors, and investigating failed calls to RDS and Redis led to DNS resolution failures.

   Remediation

   • deployed NodeLocal DNSCache as a DaemonSet in front of CoreDNS
   • added a PodDisruptionBudget (maxUnavailable 1) and topologySpreadConstraints across zones for CoreDNS
   • lowered ndots from 5 to 2 with dnsConfig in the Deployments

   Lessons

   The CoreDNS setup that EKS creates by default (two pods) can be enough for a small or development cluster but becomes a bottleneck in a large production cluster, and DNS is a single point of failure that needs high availability and room to scale. Tuning the CoreDNS cache and buffer size only relieved the symptoms; the real load came from the extra queries that ndots:5 generates for external names. A CoreDNS pod without a memory limit can share a node's fate with everything else on it.

   View case
4. IL-0081 API requests timed out during deployment rollouts because the ingress-nginx enable-serial-reloads option held back endpoint updates while a long NGINX reload was running

   Cresta2025

   Symptoms

   During a deployment, traffic into the Kubernetes cluster started hitting dead ends: some API requests timed out and requests were slow and disrupted while the rollout ran.

   Intermittent timeoutsStale endpoint routingHigh latency

   Trigger

   A deployment rollout changed backend endpoints while a long-running NGINX full reload was in progress, with the enable-serial-reloads option enabled on the ingress-nginx controller.

   Root cause

   Software defect

   Component

   Ingress controller

   Contributing factor

   –

   Remediation

   • restarted the NGINX Ingress controller as an attempt to resolve the problem

   Action items

   • Open an issue in kubernetes/ingress-nginx describing how enable-serial-reloads blocks dynamic endpoint updates

   Lessons

   A flag meant only to serialise full reloads also delayed endpoint updates, which opened a window during rollouts in which the ingress routed to pods that no longer existed. Options that change how the ingress controller applies configuration need to be checked against what happens to endpoint updates during a long reload.

   View case
5. IL-0118 A global change to Kubernetes namespace labels made the networking layer recompute metadata and overwhelmed the control planes of three of OpenAI's largest GPU clusters

   OpenAI2024

   Symptoms

   From 10:15 am PT on 25 November 2024 a large share of both API and ChatGPT traffic failed with timeouts and 503 errors.

   High error rateHigh latencyControl plane unresponsive

   Trigger

   A global change to Kubernetes namespace labels caused the networking layer to recompute metadata. The change had rolled out to the small clusters without problems.

   Root cause

   Configuration change

   Component

   Kubernetes API server

   Contributing factor

   Excessive blast radiusLimited debug access

   Remediation

   • moved workloads out of the impacted clusters by hand
   • with the cloud provider, scaled up the number of control plane nodes while scaling down the number of data plane nodes, which let the control planes recover

   Action items

   • Lock namespace changes so this incident cannot recur
   • Freeze certain types of infrastructure deploys
   • Allowlist identities to prevent a recurrence of this class of incidents
   • Improve the GPU load balancing logic so traffic is re-routed automatically and more effectively when possible
   • Improve change management for fleet-wide infrastructure changes

   View case

By root cause7