Cases13 cases

8 to 12 of 13

1. IL-0093 Ingress controller pods crash-looped one after another because the leader pod had exhausted its shared memory

   UK Ministry of Justice2020

   Symptoms

   At 10:43 on 14 August 2020 two of the six ingress controller pods in the cluster were in a crash loop. Restarting those pods did not fix them.

   Container crash loop

   Root cause

   Capacity exhaustion

   Component

   Ingress controller

   Contributing factor

   Harmful manual actionSingle point of failure

   Detection

   Two of the six ingress controller pods were seen crash-looping at 10:43; the incident was declared at 11:01.

   Remediation

   • restarted the leader ingress controller pod so the other replicas could connect and get the latest nginx configuration

   View case
2. IL-0199 A non-essential container exceeding its memory limit made GitHub's production pods unavailable, and their restarts failed because a DNS maintenance change had left the clusters unable to reach the image registry

   GitHub2020

   Symptoms

   At 08:18 UTC on 13 July 2020, production Kubernetes pods began to be marked unavailable. The loss of pods spread through the clusters and reduced capacity until GitHub.com services went down.

   OOMKilledImage pull failuresService outage

   Trigger

   A container in the production pods exceeded its memory limit and was terminated; a routine DNS maintenance operation completed earlier had left the clusters unable to reach the image registry.

   Root cause

   DNS or network fault

   Component

   Container memory limitContainer registry and its credentials

   Contributing factor

   Overlapping failuresHarmful manual actionSingle point of failure

   Remediation

   • restarted the process with the cached DNS records so the clusters could reach the registry
   • fetched the container images, redeployed and recovered the services

   Action items

   • Improve monitoring so pod restarts cannot fail again in the same pattern
   • Minimise the dependency on the image registry
   • Expand validation during DNS changes
   • Re-evaluate all existing Kubernetes deployment policies
   • Improve progressive deployments so the impact of a deployment can be evaluated incrementally

   Lessons

   A container that production traffic does not need can still take pods out of service, because a pod is available only when all of its containers are healthy. ImagePullPolicy Always turns every container restart into a registry dependency, so an unrelated DNS change that breaks registry access turns a one-minute self-healing event into a long outage, and a mass redeploy spreads it.

   View case
3. IL-0076 Kubernetes masters went down after Dex filled etcd with AuthRequest objects and deleting its namespace started an endless list-and-timeout loop

   Fullstaq2019

   Symptoms

   Dex, the OIDC proxy that handled Kubernetes authentication, stored its data in the Kubernetes API (storage type kubernetes, inCluster: true) and had built up a huge number of AuthRequest objects. Listing all AuthRequests timed out, and without the list they could not be deleted.

   Control plane unresponsiveMonitoring outage

   Trigger

   The dex namespace was deleted so that Kubernetes would clean up the accumulated AuthRequest objects itself.

   Root cause

   Capacity exhaustion

   Component

   Kubernetes API serveretcdCluster authentication provider

   Contributing factor

   Unreviewed defaultsHarmful manual actionRetry stormLimited debug accessIgnored early signal

   Detection

   The speaker says he had got hints of the problem earlier. While the masters were down, plenty of alerts arrived in Slack, but monitoring could not be reached because authentication and port-forwarding no longer worked.

   Remediation

   • removed the kubernetes finalizer from the dex namespace by calling the API directly (kill-kube-ns)
   • deployed Dex to a new namespace with sane defaults

   Lessons

   Dex with Kubernetes as its storage keeps every AuthRequest as an API object, and with a long TTL they pile up until the API cannot list them. Deleting a namespace that holds that many objects makes Kubernetes list them in a loop and can overload the masters. Monitoring that is reached through cluster authentication is lost when authentication is what broke.

   View case
4. IL-0037 Image registry rate-limited a whole region after a crash-looping DaemonSet with imagePullPolicy Always pulled through three NAT instances

   Datadog2019

   Symptoms

   Users reported that their jobs were not starting, with some sign that image pulls were involved. Many pods across the cluster were in error states related to image pulls, while applications that were already running were not affected.

   Image pull failuresService outage

   Trigger

   A change to the permissions on a storage bucket that one application needed to read. The application could no longer start, and its DaemonSet, running on roughly a thousand nodes of the cluster, went into a crash loop with imagePullPolicy: Always, so every restart pulled the image again although it was already on the node.

   Root cause

   Capacity exhaustion

   Component

   Container registry and its credentialsNAT gatewayApplication databaseAdmission webhook

   Contributing factor

   Automation amplificationSingle point of failureUnknown limitHarmful manual actionExcessive blast radius

   Detection

   Users reported that their jobs were not starting; monitoring had not caught it first.

   Remediation

   • replaced the affected NAT instances so registry traffic came from new source IPs
   • reconfigured the static IPs and firewall rules so applications could reach the Cloud SQL database again

   Action items

   • Add an admission webhook that rejects floating image tags, starting with latest
   • Apply the image tag webhook to workload objects only, not to pods, after it blocked pods created by in-cluster controllers

   Lessons

   The speakers' takeaway is to be very careful with DaemonSets in large clusters: they say they had broken everything DaemonSets depend on, including DNS, Vault and the image repository, and that it is very easy to break things when managing them by the thousand. imagePullPolicy: Always made every crash-loop restart pull the image again. Sending all registry traffic through three NAT instances put the whole region behind three source IPs, which the registry rate-limited, and changing those IPs cut the connections to a critical database reached over the internet through them. An admission webhook on pods rejects the pods that controllers in the cluster create, where no user sees the error.

   View case
5. IL-0059 Single-master Kubernetes control plane kept dying because the kubelet restarted a healthy etcd on a failing kubeadm liveness probe

   NRE Labs2018

   Symptoms

   The daily NRE Labs statistics showed lesson activity collapsing, and kubectl could not reach the cluster: `The connection to the server 1.2.3.4:6443 was refused - did you specify the right host or port?`

   Control plane unresponsiveProbe failuresService outage

   Trigger

   Unknown. The liveness probe that kubeadm writes into the etcd static pod manifest (an `etcdctl get foo` against 127.0.0.1:2379, failureThreshold 8, timeoutSeconds 15) started failing. The author first suspected GCP maintenance the night before, but could not reproduce the probe failure by hand and does not know why it began.

   Root cause

   unknown

   Component

   etcdkubeletKubernetes API server

   Contributing factor

   Single point of failureUnreviewed defaultsHarmful manual actionIgnored early signalMonitoring blind spot

   Detection

   The author saw lesson activity drop in the daily NRE Labs statistics during his morning routine.

   Remediation

   • removed the liveness probe section from the kubeadm-generated etcd static pod manifest and applied it between etcd restarts

   Action items

   • Add monitoring, especially for the single-node master
   • Run a basic "down for maintenance" page in Google Cloud Functions that points to Twitter for updates, to redirect to during outages

   Lessons

   Because all of the infrastructure is managed as code, the cluster could be rebuilt quickly, but destroying it before finding the cause also destroyed the evidence. Monitoring matters, especially with a single-node master. Read the restart counts in kubectl output, not just the Running status. Remember the fundamentals instead of expecting the issue to be more complicated than it is, and do not let the urgency of an outage push you into hasty decisions. Put up a maintenance page instead of leaving the site failing halfway.

   View case

By root cause5