Cases7 cases

4 to 7 of 7

1. IL-0094 Student pods filled the shared nodes of a JupyterHub cluster and starved the hub's core pods, freezing the hub

   2i2c2020

   Symptoms

   At 08:52 PM IST a report came in from WER that many students could not access the JupyterHub and that it was frozen; pages were stuck and nothing was usable. A rise in activity was visible by 09:02 PM, but the usual fixes, such as opening an incognito window and restarting servers, did not help.

   Service outageSustained high node CPU

   Trigger

   WER students' pods used a good chunk of their memory limit (tests had shown they almost always use just under 1G of their 2G limit, against a 512M guarantee) on nodes shared with the hub's core pods.

   Root cause

   Capacity exhaustion

   Component

   Node poolContainer memory limit

   Contributing factor

   No resource requests or limitsUnverified assumptionExcessive blast radius

   Detection

   WER reported stuck pages and students unable to reach the hub in a GitHub issue (2i2c-org/docs#27).

   Remediation

   • removed memory overcommit for the WER students
   • raised resource guarantees for all core pods, which restarted them and moved some to a new node

   Action items

   • Put user pods in a separate pool so they do not create pressure on the core pods (infrastructure#89)
   • Set limits on the support infrastructure (Prometheus, Grafana, ingress) as well (infrastructure#90)
   • Document and think about overcommit ratios for memory usage (infrastructure#91)
   • Set up better Grafana dashboards to monitor resource usage (infrastructure#92)
   • Document how people can get kubectl access to the cluster so others can look into issues too (infrastructure#87)

   Lessons

   Core pods without resource guarantees get whatever is left on a node, so when user pods on the same nodes fill the CPU and memory, the hub that serves everyone freezes. The memory overcommit ratio has to come from measured use: WER students used just under 1G against a 512M guarantee, which a 4x overcommit could not hold.

   View case
2. IL-0176 Prometheus in a 235-node Kubernetes cluster crash-looped because over two million series exhausted host memory and the kernel OOM killer chose it first, as Burstable QoS gave it oom_score_adj 999

   LINE2020

   Symptoms

   One Monday morning the author opened the Prometheus dashboard to check a Kubernetes cluster for alerts and could not reach it. The Prometheus pod was in CrashLoopBackOff: kubectl get pods showed it 1/2 ready with 950 restarts over 3d20h on worker3.

   Container crash loopOOMKilledMonitoring outageProbe failures

   Trigger

   After start, the Prometheus time series count rose to 2,162,256 within five minutes and its memory use filled the 8GB host.

   Root cause

   Capacity exhaustion

   Component

   PrometheuskubeletLinux kernel

   Contributing factor

   No resource requests or limitsNo capacity planning

   Detection

   The author found it on a Monday morning when the Prometheus dashboard, opened to check the cluster for alerts, could not be reached.

   Remediation

   • removed most of the unnecessary settings from the Prometheus ConfigMap, after which the container stopped crashing

   Action items

   • Set appropriate resource requests and limits on the Prometheus pod
   • Reduce unneeded metrics by adjusting scrape targets or scrape interval
   • Estimate Prometheus memory needs, provide dedicated hosts with a node label such as deploy-topology: Prometheus, and pin the Prometheus pod to them with a nodeSelector

   Lessons

   Exit code 137 together with an OOM event in the kubelet log means the kernel killed the container, not kubelet. Under node memory pressure the kernel kills the process with the highest score, and kubelet derives each container's oom_score_adj from the pod's QoS class: a container without a memory request in a pod where another container has one ends up Burstable with a score near 1000, so it is killed first. In a large cluster, Prometheus memory needs to be estimated from the expected series count and requested explicitly.

   View case
3. IL-0026 Kubernetes nodes hit SystemOOM because fluentd-sumologic log shipper pods had no memory limits

   Blue Matador2019

   Symptoms

   On a Saturday at 5:12 pm, Blue Matador's own monitoring raised a SystemOOM event for one node in the production Kubernetes cluster. Four minutes later a second warning reported a low EBS Burst Balance on that node's root volume. CloudWatch data showed the burst balance had actually bottomed out at 5:02 pm, before the memory event; the warning arrived late because EBS metrics lag 10 to 15 minutes.

   OOMKilled

   Trigger

   Memory use of the fluentd-sumologic log shipper pods grew until the node ran out of memory; log volume in Sumo Logic had been steady, so a burst of logs was not the cause.

   Root cause

   Capacity exhaustion

   Component

   Telemetry agentContainer memory limit

   Contributing factor

   No resource requests or limitsIgnored early signal

   Detection

   Blue Matador's own monitoring product alerted on the SystemOOM event, followed minutes later by a low EBS Burst Balance warning for the same node.

   Remediation

   • restarted all fluentd-sumologic pods so they started with low memory
   • set RUBY_GC_HEAP_OLDOBJECT_LIMIT_FACTOR to 0.9 on the fluentd-sumologic pods
   • added memory requests of 128Mi and limits of 1024Mi, and CPU requests of 100m and limits of 250m, to the fluentd-sumologic pods

   Action items

   • Apply default resource limits and resource quotas so that every pod runs with requests and limits

   Lessons

   When checking for restarted pods, look in every namespace, not only the application one. Set resource requests and limits on every pod, third-party ones in particular, so that one workload cannot exhaust a node. Investigate side signals such as the disk I/O spike while the logs still exist.

   View case
4. IL-0035 Worker nodes went NotReady after a new ElastAlert rule without memory limits used up node memory

   NU.nl2019

   Symptoms

   The NU.nl development team got reports that several services on one of its Kubernetes clusters behaved erratically: occasional error pages, slow responses and timeouts. The affected services were mostly internal tools and dashboards.

   Node NotReadyHigh error rateHigh latencyIntermittent timeoutsMonitoring outageOOMKilled

   Trigger

   A new ElastAlert rule, deployed shortly before from the command line, that fired if the Cloudfront-* Elasticsearch indexes stopped receiving documents; those indexes take a few million requests per hour, and the rule made ElastAlert's memory grow without bound.

   Root cause

   Configuration change

   Component

   Container memory limitkubeletPrometheus

   Contributing factor

   No resource requests or limitsUnreviewed defaultsNo alert on limitMonitoring blind spotExcessive blast radius

   Detection

   Users reported error pages, slow responses and timeouts from several services; no alert fired.

   Remediation

   • terminated the NotReady nodes one by one so the auto-scaling group replaced them (the new nodes also went NotReady, but Prometheus and Grafana landed on a stable node)
   • found the ElastAlert pods' memory growth on the Grafana pod memory dashboard
   • fixed the ElastAlert problem that caused the memory growth

   Action items

   • Define alerts on resource usage such as CPU, memory and disk space
   • Keep researching an alerting strategy that combines Elasticsearch, Prometheus Alertmanager and New Relic
   • Consider exporting metrics out of the cluster and running Grafana outside it, on EC2 or a separate Kubernetes cluster
   • Either visualise the important metrics in the ELK stack or make Prometheus and Grafana more available, and improve the metrics strategy
   • Set resource limits for ElastAlert through the Helm values
   • Configure namespaces with default memory requests and limits
   • Isolate customer-facing workloads from build, logging and monitoring workloads (a dedicated node group, or later a separate tools cluster)
   • Deploy everything through automation such as Jenkins pipelines, and consider a GitOps approach
   • Deploy through a pipeline that includes a smoke test step
   • Make Kubernetes and cloud infrastructure work part of the team's sprints, picked up by all team members while pairing with more experienced members, and hold workshops that go deep into specific topics

   Lessons

   Fixing the root cause covers only a small part of what an incident can teach; the chain of smaller failures around it is where most of the learning is. A pod without a memory limit can take whole nodes down, so limits need defaults at the namespace level. Monitoring that runs inside the cluster it watches goes blind with it. Changes installed by hand from the command line leave the rest of the team without a record of what changed.

   View case

By root cause3