Cases71 cases

34 to 38 of 71

1. IL-0060 Kubernetes 1.24 upgrade removed the master node label that Calico route reflectors selected on, dropping all pod routes and taking Reddit down for 314 minutes

   Reddit2023

   Symptoms

   About two minutes after an engineer started the Kubernetes 1.23 to 1.24 upgrade of the cluster running Reddit's legacy stack, just after 19:00 UTC, the site stopped. The CDN edge request graph, which is kept separate from the cluster, showed traffic by status collapsing. Users saw the error page, a homepage with no posts, or plain errors.

   Service outageHigh error rateDNS resolution failuresMonitoring outagePods stuck in ContainerCreatingControl plane lag

   Trigger

   An in-place upgrade of the legacy cluster from Kubernetes 1.23 to 1.24; in 1.24 the node-role.kubernetes.io/master label is removed even from running clusters.

   Root cause

   Breaking change in an upgrade

   Component

   CalicoKubernetes API serverAdmission webhooketcd

   Contributing factor

   Configuration not in codeUnrepresentative stagingUntested backupMonitoring blind spotSingle point of failure

   Detection

   The site broke about two minutes into the upgrade; an incident was opened immediately and responders were on the call within three minutes, working from CDN edge graphs because the cluster's own metrics were gone.

   Remediation

   • deleted the Open Policy Agent webhook configurations to stop API server timeouts
   • terminated all worker nodes of the cluster
   • restored the control plane from the pre-upgrade backup onto the first control plane node
   • switched off the cluster autoscaler until the control plane was stable
   • generated new TLS certificates so replacement control plane nodes could join etcd
   • brought traffic back in steps from 1% to 100%
   • restarted legacy services that had been stopped by hand

   Action items

   • Codify cluster configuration so every choice has a record, and document in detail what cannot be codified
   • Standardise components across clusters and replace bespoke configurations
   • Build tooling to manage the lifecycle of whole clusters so they can be recreated or replicated
   • Add pre-production clusters that can be tested with confidence
   • Improve the backup restore process and make cluster upgrades safe

   Lessons

   Configuration that exists only in a live cluster, edited by hand through a special tool, can be forgotten, as the route reflector setup was, and then break on an upgrade nobody connects it to. A Kubernetes upgrade cannot be reverted without a restore, so the restore procedure has to be kept current and practised. Consistent, codified clusters are what make upgrades testable; bespoke clusters keep producing outages.

   View case
2. IL-0198 An automatic Ubuntu security update restarted systemd-networkd, which flushed the IP rules Cilium relied on and cut more than 60 percent of Datadog's Kubernetes nodes off the network across regions and cloud providers

   Datadog2023

   Symptoms

   Between 06:00 and 07:00 UTC on 8 March 2023, Kubernetes nodes in several Datadog regions lost network connectivity at the same time, on AWS, Google Cloud and Azure. All services across multiple regions were affected, including the regions that host Datadog's CI/CD and automation tools. Datadog's regions are not connected to each other and changes are rolled out one region at a time, so a simultaneous failure on several cloud providers looked implausible at first.

   Node NotReadyService outageThroughput degradation

   Trigger

   On 7 March 2023 Ubuntu published a systemd patch for a CVE (249.11-0ubuntu3.7). Ubuntu's default unattended upgrades installed it on the nodes between 06:00 and 07:00 UTC on 8 March, and installing it restarted systemd-networkd.

   Root cause

   Breaking change in an upgrade

   Component

   systemd-networkdCiliumNode operating system image

   Contributing factor

   Unreviewed defaultsChange with a delayed effectNo staged rolloutAutomation amplification

   Remediation

   • restarted thousands of disconnected instances on Google Cloud and Azure through the cloud APIs, keeping their local disks
   • rebuilt the data lost with terminated AWS instances' local disks through replication, reprocessing and restores from backup

   Lessons

   A change in a base operating system component can stay dormant for months until something restarts that component. Here the trigger was a security patch, and the change reached every region at once because automatic OS updates ran outside the progressive, region-by-region process used for every other change. Cloud providers react differently to an instance that loses its network. Google Cloud and Azure left the instances running, so a restart recovered them with their disks; AWS replaced them quickly, which brought stateless services back fast but destroyed the local-disk data the stateful services needed.

   View case
3. IL-0109 A retried node rollover on a DFDS EKS cluster set the Auto Scaling group back to 15 instances, and the default termination policy removed every healthy worker node, leaving the cluster with no nodes

   DFDS2023sev1

   Symptoms

   At 09:33 UTC on 14 February 2023 end users told the platform team that Kubernetes logs were not arriving in CloudWatch as expected. The investigation went through fluentd and found that the nodes were running containerd as their container runtime instead of docker-shim. A scheduled node rollover the day before, at 07:30 UTC on 13 February, had set containerd as the default runtime by accident.

   Service outageResources deletedMonitoring outage

   Trigger

   A scheduled node rollover had accidentally made containerd the default container runtime, which stopped log shipping to CloudWatch; the unscheduled rollover to revert it timed out, and the pipeline run that followed reduced the Auto Scaling group from 30 to 15 instances.

   Root cause

   Configuration change

   Component

   Container runtimeNode launch templateNode poolTerraformTelemetry agent

   Contributing factor

   Automation amplificationUnreviewed defaultsUnrepresentative stagingNo configuration testsNo runbookHarmful manual action

   Detection

   End users reported the missing CloudWatch logs that started the work. The postmortem lists 2 minutes as the time to detection of the node failure.

   Remediation

   • ran the node rollover script to add new nodes, which failed on a timeout from Docker Hub
   • ran the node rollover script a second time, which added new nodes that the load balancer marked healthy at 11:01 UTC

   Action items

   • Document the rollover process, especially what can be done when it goes wrong
   • Investigate options for improving the rollover process
   • Add fluentd log collection to the QA test suite so logs are covered end to end
   • Add alarms for fluentd when too little or no log data is sent
   • Implement a staging environment
   • Implement guards against selecting an invalid container runtime

   Lessons

   When a change goes wrong, rolling back to a known working configuration is safer than rushing a fix, which can make the damage worse. Launching new worker nodes depends on the cloud-init script not failing in any way. The QA configuration differed from production, there was no staging environment, the QA tests did not cover fluentd log collection, and the rollover process had no documentation for when it fails.

   View case
4. IL-0116 A CNI configuration change incompatible with a hardware variant that exists only in production cut network connectivity in an OpenAI GPU cluster and took text-davinci-003 fully down

   OpenAI2023

   Symptoms

   At 4:53 pm Pacific on 25 January 2023 one of OpenAI's GPU clusters had a major outage, and the text-davinci-003 model went fully down.

   Service outageThroughput degradation

   Trigger

   A configuration change to the CNI (Container Network Interface) plugins, which provide network connectivity to containers, was deployed to a GPU cluster that contained a hardware variant the staging environment did not have.

   Root cause

   Configuration change

   Component

   CNI plugin

   Contributing factor

   Unrepresentative stagingMonitoring blind spot

   Detection

   Engineers immediately identified the problem as network connectivity, but it took nearly an hour to identify CNI as the cause.

   Remediation

   • put a fix for the CNI configuration change in place, which restored 80% of traffic immediately
   • deployed models back onto GPUs over about three more hours until capacity was fully stable

   Action items

   • Make staging environments contain every type of hardware configuration so they better represent production
   • Monitor and alert on the health of the CNI system directly
   • Fix the network and storage bottlenecks that limit how quickly many replicas of a model can be deployed

   Lessons

   A change that had been deployed to other clusters over 24 hours and deemed safe still broke a cluster with different hardware, so staging needs every hardware configuration that production has.

   View case
5. IL-0207 A routine task run from an engineer's local environment switched to production and deleted GitLab.com's Consul release, so Patroni lost Consul and GitLab.com returned 5xx errors to all traffic

   GitLab2022

   Symptoms

   GitLab's monitoring and alerting fired at once. One of the alerts reported a Patroni failover, and users of GitLab.com received 5XX errors; the CDN counted about 13 million requests answered with 503 during the outage.

   Service outageHigh error rateResources deleted

   Trigger

   An engineer ran a routine task with GitLab's tools in a local development environment; during a local deploy or rollback operation the tool's context changed from local development to production, and the change was applied to production.

   Root cause

   Operator error

   Component

   Application database

   Contributing factor

   No safeguard on destructive change

   Detection

   GitLab's monitoring and alerting fired immediately; one of the alerts reported a Patroni failover.

   Remediation

   • re-applied the Consul release to the production Kubernetes cluster, with manual steps because the tooling did not support the redeploy directly

   Action items

   • Improve the Kubernetes deployment process to reduce the risk of running harmful deployment operations against production from local environments (https://gitlab.com/gitlab-com/gl-infra/reliability/-/issues/16875)
   • Integrate Teleport with the Kubernetes clusters, which could give SREs a read-only role by default (https://gitlab.com/gitlab-com/gl-infra/reliability/-/issues/16221)

   Lessons

   A tool that can switch its target from a local environment to production during a deploy or rollback turns routine local work into a production change. GitLab plans to improve its Kubernetes deployment process so that harmful deployment operations are less likely to be run against production from local environments, and to integrate Teleport with its clusters, which could give SREs a read-only role by default. Detection and diagnosis were fast because the alerts led straight from Patroni to its dependency, Consul. Bringing the deleted release back needed manual work, because the tooling did not make the redeploy straightforward, but it was still done relatively quickly.

   View case

By root cause11